This is a one year programme that gives you an entry route into the following four different Engineering honours degree courses: Agricultural Engineering Biomedical Engineering Energy Engineering Mechanical Engineering. It will give you the opportunity to discover these disciplines during first year, before you have to make a final decision on which course is right for you. So, you can start now, and choose later.

This is a one year programme that gives you an entry route into the following four different Engineering honours degree courses: Agricultural Engineering, Biomedical Engineering, Energy Engineering, Mechanical Engineering, and Manufacturing Engineering Design.

It will give you the opportunity to discover these disciplines during first year, before you have to make a final decision on which course is right for you. So, you can start now, and choose later. 

The Common Engineering Honours Entry Scheme is a one year programme for students interested in engineering as a career, but who may be unsure of which discipline to follow.

The Scheme gives students the opportunity to see all four engineering disciplines first hand. Through the various modules on offer, interaction with the lecturers and site visits will assist the student to decide which discipline suits him/her best. 

• CR510 BEng (Honours) in Sustainable Energy Engineering
• CR520 BEng (Honours) in Biomedical Engineering
• CR105 BEng (Honours) in Chemical and Biopharmaceutical Engineering
• CR108 BEng (Honours) in Mechanical Engineering
• CR109 BEng (Honours) in Structural Engineering

This course includes a common first year entry which allows students to experience different disciplines before choosing their specialisation of Civil, Mechanical or Electrical and Electronic Engineering at the end of Year 1.

Electronic Engineering at Maynooth has developed world-class expertise in the area of mobile communications, biomedical diagnostics and technologies, and the intelligent control of large machines such as Robots or wave machines.

Each of these areas is matched to rapidly growing industries and excellent job opportunities. By bringing this deep knowledge to all the undergraduate programmes, we provide our graduates with a world-class electronic engineering education but also a head start in these exciting and developing areas.

At UCD, we place considerable emphasis on the mastery of analytical skills and the use of quantitative methods. Study is based on solid mathematical, scientific and engineering principles. Essentially, these are the fundamentals of engineering and they will enable you to navigate successfully through the challenges you will face in your future career. We work with industry to ensure that our programmes produce graduates who are highly skilled and trained to address the problems that organisations and society face. 

Engineers are concerned with developing economical and safe solutions to practical problems, by applying mathematics and scientific knowledge while considering technical constraints. LM116 Engineering common entry is designed to provide you with a gateway to your preferred engineering discipline. You will complete a broad first year which will introduce you to various topics in engineering. Having gained a better understanding of each subject area, you then choose your preferred pathway to specialise for the remaining years of your degree programme. At UL, you get to try before you decide.

LM116 Engineering is the gateway to a degree in either:

• BE/ME in Biomedical Engineering
• BE/ME in Mechanical Engineering
• BE/ME in Civil Engineering
• Bachelor of Engineering in Design and Manufacture Engineering
• BE/ME in Digital Mechatronic Engineering

This is a new common entry degree programme aimed at giving you a solid foundation in engineering while allowing you a little extra time to decide exactly which area of engineering you would like to study. The degree options from the common entry Engineering degree are:

BEng (Hons) in Sustainable Energy Engineering
BEng (Hons) in Sustainable Civil Engineering
BEng (Hons) in Electronic Engineering
BEng (Hons) in Electrical Engineering
BEng (Hons) in Automation Engineering

During the first year of the course, our students are exposed to a learning environment that allows them to make informed choices about the next stage of their learning. The options available are dependent on the aptitudes, interests and career opportunities in the different fields. First-year students can talk to lecturers and other students to determine the best approach for them in their career. This gathering of information is very useful for students who know they want to do engineering but are not fully decided on what stream is best suited to them.

 BE Electrical and Electronic Engineering is a four-year professional engineering course designed to prepare students for employment in the electrical and electronic sectors in Ireland and abroad. It has a broad curriculum with strong practical content, including a work placement. It has an excellent record for graduate employment.

The first year of the BE is a broad education in engineering fundamentals. Through a combination of solid engineering fundamentals covered in the first two years of the course (e.g. thermodynamics, fluids, and electrical systems) and advanced energy engineering topics covered in the final two years (including power electronics, control systems, wind, solar photovoltaic and ocean energy, energy demand management and energy policy), graduates of the Energy Engineering course will be well-equipped to source, design, convert, transmit and supply useful energy to meet the world's present and long-term needs. 

This Common Entry course offers a mix of electronic, electrical, computer, robotics and mechanical. You can sample core engineering modules in first year so that you can decide which area of engineering you enjoy most before choosing the area you want to pursue in subsequent years. 

If you’re not sure which area of engineering to go for, this course is probably the right one for you. It’s designed to enable students to sample core engineering modules in first year and help them decide which area of engineering they most enjoy. They can then choose the area they want to pursue in subsequent years.

In your first year, you’ll study subjects such as Algebra and Geometry, Digital Electronics, Engineering Science, Fundamentals of Calculus, Electrical Science, Introduction to Electronic Communications and Professional Development for Engineers, and gain experience in Workshop Practice. 

This one-year course provides you with a general access route to engineering courses if you haven’t decided yet which engineering discipline you’d like to study. You’ll study Maths, Science, Engineering Design and Drawing, and will be given a general introduction to the engineering profession.

TU805 is the common first year entry point for the majority of four year Level 8 Engineering Degrees in TU Dublin. Students specialise in second and subsequent years and may choose:

• TU821 Electrical & Electronic/Computer & Communication Engineering
• TU822 Mechanical Engineering
• TU823 Manufacturing Engineering
• TU824 Structural Engineering
• TU825 Building Engineering
• TU826 Civil Engineering

The first year of the BE is a broad education in engineering fundamentals. Process and Chemical Engineers are involved in the design, modification and operation of processes to produce products across a broad range of process industries, including bio/pharmaceuticals,  food and drinks production, bulk chemicals and fuels/energy. Process and Chemical engineering helps provide a pathway towards meeting societal requirements around health and well being, energy provision, food production, water supply, waste management and consumer goods. 

Engineering is a wide area, covering such fields as civil, mechanics, electronics and computer technology. This course offers you the option of studying engineering in a general way for a year before going on to specialise in your chosen field in year two. It has been designed to help you make your choice about what professional engineering qualification you wish to study by giving you a year to study the basic concepts and fundamentals of engineering.

This course places emphasis on civil engineering design and practice, by developing specialised and in-demand industry skills. Students manage and design projects of all scales as individuals and as part of teams, on topics such as Fluid Mechanics, Highway Engineering, Structural Mechanics, and CAD.

This programme offers students an introduction into a wide range of engineering disciplines. Our suite of Civil Engineering, Mechanical Engineering and Robotics & Automation all have common Year 1 modules, giving students a taste of each engineering discipline before having to commit  to which area of engineering they wish to specialise in from Year 2. This general engineering year gives students exposure to all the different types of engineering that are on offer and equips them with the fundamentals of engineering. It will help to make an informed choice of what field of engineering to enter based on aptitude and interest.   

This course equips students with the practical skills required to be a practical electronic or electrical engineer. Students study the basic concepts in electrical and electronic systems, the equipment used, and the practical applications of these to innovate solutions for local and international industry in the areas of Electrical Engineering, Electrical Services, Control, Automation, Energy Production and Renewable Technologies.

ATU Sligo offer a wide range of engineering programmes including Civil Engineering, Mechanical Engineering, Mechatronics and Precision Engineering and Design. This degree offers students the opportunity to study engineering in a general way for a semester before specialising in an area of their choice. This general engineering semester gives students exposure to all different types of engineering and equips them with the fundamentals of engineering.

Students on this course combine the knowledge of physical sciences and engineering education with practical experience to invent, design, manufacture, run and maintain mechanical systems equipment and tools. Course topics include mechanics, fluids, heat, mathematics, materials, manufacturing, and computer-aided design.

This Engineering Technology Management programme was created to provide learners with an essential combination of engineering and management abilities that are critical skill sets required in Industry. Graduates will be crucial in designing, controlling and managing challenging projects and tasks such as innovative products, developing sustainable global systems, efficient processes, and developing entrepreneurial skills such as creating new business models to support high-value manufacturing settings. Engineering Technology Management graduates will develop the technical expertise of engineers combined with a comprehension of the business and industrial environment and the capacity to develop creative solutions. 

Engineering Technology Management was created for students with an essential combination of core engineering. Graduates will be crucial in managing, designing and controlling challenging projects and tasks such as innovative products, developing sustainable global systems, efficient processes, implementing Big Data and AI analytics and developing entrepreneurial skills such as creating new business models to support high-value manufacturing settings. Engineering Technology Management graduates will develop the technical expertise of engineers combined with a comprehension of the business and industrial environment and the capacity to develop creative solutions.