A construction plant fitter services, diagnoses and resolve technical issues in mobile equipment used in materials handling for the off-road and on-road construction, excavation, mining, forestry and waste management industries. They carry out routine service procedures as recommended by the manufacturers; and diagnose and resolve problems with the operation of the mechanical, hydraulic, pneumatic and electrical systems of machines and equipment such as tracked excavators, forklifts, and cranes.

MTU is the only Technological University or Institute of Technology in the country which offers craft level apprenticeship courses in construction plant fitting.

A plasterer is involved in the preparation and application of protective covering to interior and exterior building surfaces. This work can also involve applying decorative marking and finishes to walls such as pebbledash to achieve a required finish. A plasterer may be required to lay the finishing surface of cement floors for houses, factories and garages. Fibrous plasterers may work from architects’ designs or copy pieces of plasterwork from artists’ drawings or from photographs to produce ornamental work.

MTU is the only Technological University or Institute of Technology in the country which offers craft level apprenticeship courses in plastering.

A plumber installs, maintains and repairs systems of water supply, drainage and central heating in houses and other locations. These systems include hot and cold- water systems, sanitary services, heating systems and pipework and controls for gas supply. Plumbers carry out maintenance and repair work including routine servicing and emergency repairs, which involves finding faults and replacing or repairing damaged parts, carrying out tests and ensuring that the system works properly. Work on technologies such as gas fired and oil-fired heating systems, under-floor heating, solar, geothermal and biomass heating is also performed by qualified plumbers.

On completion of this four-year apprenticeship, you will become a fully qualified electrician, with a QQI Level 6 Advanced Certificate Craft – Electrical.

As an electrician you will be involved in the installation, commissioning, testing and maintenance of various wiring systems and services in domestic, commercial and industrial applications. Your work will range from wiring domestic houses and retail units, to more complex systems involving process control and maintenance in industrial plants, hospitals and power stations. Electricians also service, maintain and repair electrical equipment, both domestic and industrial. If you are employed by the Electricity Supply Board (ESB) you will be working on electrical power supply and distribution.

Electricians employed by electrical contractors are usually engaged in installation of lighting, heating and power equipment and the repair of existing equipment and appliances. If you work in industrial employment you will generally be engaged in the maintenance and repair of factory plant, machinery and generating equipment. Many apprentices use their apprenticeship qualification as a platform to launch careers such as engineers, managers, owners of businesses, teachers and instructors amongst others.

On completion of this four-year apprenticeship, you will become a fully qualified electrician, with a QQI Level 6 Advanced Certificate Craft – Electrical.

As an electrician you will be involved in the installation, commissioning, testing and maintenance of various wiring systems and services in domestic, commercial and industrial applications. Your work will range from wiring domestic houses and retail units, to more complex systems involving process control and maintenance in industrial plants, hospitals and power stations. Electricians also service, maintain and repair electrical equipment, both domestic and industrial. If you are employed by the Electricity Supply Board (ESB) you will be working on electrical power supply and distribution.

Electricians employed by electrical contractors are usually engaged in installation of lighting, heating and power equipment and the repair of existing equipment and appliances. If you work in industrial employment you will generally be engaged in the maintenance and repair of factory plant, machinery and generating equipment. Many apprentices use their apprenticeship qualification as a platform to launch careers such as engineers, managers, owners of businesses, teachers and instructors amongst others.

A refrigeration and air conditioning craftsperson installs, maintains and repairs all types of refrigeration and air-conditioning equipment and systems. They can work in industries such as domestic, marine, commercial and industrial. They can install, maintain and repair items such as household, hospital, hotel and shop refrigerators, display cabinets, deep freezers, cooling plants, cold rooms and refrigerated transport.

A manufacturing engineer facilitates efficient operations within the production area, to optimise existing processes, implement new processes and to ensure that production goals are met. This involves the monitoring of the performance of equipment, machines and tools and correct equipment problems. A manufacturing engineer analyses and solves problems using basic engineering principles leading to new or improved products. It also involves the application of project management methodologies to manage production and product design.

Those that successfully complete the programme will be awarded a Level 7 Bachelor of Engineering degree from MTU.

A manufacturing technician provides technical support for manufacturing operations including troubleshooting equipment and process issues, and validation and qualification activities of the manufacturing site. It will be necessary to work with production, operations,engineering support, quality, facilities, and safety to ensure that the engineering activities are completed as per defined project schedule. The job also involves coordinating corrective maintenance activities for production equipment within the manufacturing site.

Those that successfully complete the programme will be awarded a Level 6 Higher Certificate from MTU.

A metal fabricator will be involved in the installation and manufacture of a range of metallic systems to include pressure vessels; tank and boiler manufacture; structural steel systems; plate steel systems and piping systems.

The job entails the reading of drawings and working with materials such as low carbon steel, stainless steel, alloy steel and aluminium. A metal fabricator uses skills such as measuring, marking out, cutting and welding materials using different processes and assembly techniques. A metal fabricator may also work outdoors and may be required to work at heights.

Pipefitters install, repair and maintain high and low- pressure pipe systems used in commercial and industrial installations. You will work on piping systems that carry all kinds of liquids, gaseous and solid materials, and provide a wide range of services including welding and fabrication in a variety of industries. MTU is the only Technological University or Institute of Technology in the country which offers craft level apprenticeship courses in pipefitting.

A logistics associate typically liaises with transportation companies to create a good working relationship. It will involve preparation of invoices for orders and deliveries as part of record keeping measures. Record-keeping of shipping, road and air freight activities, documenting procedures, guidelines and changes in procedures for reference purposes. A logistics associate is responsible for ensuring compliance with customs duties, controls, tariff, international conventions and agreements.

Those that successfully complete the programme will be awarded a Level 6 Higher Certificate from MTU.

A motor mechanic is responsible for the servicing, maintenance and fault diagnosis of light passenger cars and light commercial vehicles. Motor mechanics carry out routine service procedures as recommended by the vehicle manufacturer, as well as diagnosing and resolving problems with the operation of the mechanical and electrical systems of vehicles. Motor mechanics are also involved in examining and preparing vehicles for the National Car Test (NCT) or the Commercial Vehicle Road Worthiness Test (CVRT).

The new BA (Honours) in Recruitment Practice is a three-year apprenticeship degree created in partnership with the Employment and Recruitment Federation (ERF). This recruitment apprenticeship programme is the first of its kind in Ireland and there are no other Level 8 degree programmes in recruitment or qualifications in recruitment that are on the National Framework of Qualifications.

This programme seeks to provide the appropriate education and training to allow successful graduates be registered with SOLAS as a Recruitment Executive apprentice. The programme will provide an alternative talent pipeline to the recruitment industry and offer a new career path for candidates. The course is open to mature students, school leavers, current recruiters and anyone looking for a career change.

On completion of this four-year apprenticeship, you will become a fully qualified brick and stonelayer, with a QQI Level 6 Advanced Certificate Craft – Brick and Stonelaying.

Brick and stonelayers go on to be employed in the building industry, working on new buildings, restorations, and extensions.

Many craftspersons use their qualification as a platform to launch careers such as managers, owners of businesses and instructors amongst others.

On completion of this four-year apprenticeship, you will become a fully qualified electronic security systems installer, with a QQI Level 6 Advanced Certificate Craft – Electronic Security Systems.

You may then choose to work as electronic security systems installer in the security installation industry working on integrated security systems.

Many apprentices use their apprenticeship qualification as a platform to launch careers such as managers, owners of businesses and instructors amongst others.

On completion of this three-year apprenticeship, you will become a fully qualified laboratory analyst, with a QQI Level 7 Ordinary Bachelor of Science Degree - Laboratory Analyst.

You may then work in a laboratory environment in biopharma, chemical manufacturing, medical devices and diagnostics, food and drink, and analytical testing laboratories.

With this two-year apprenticeship, you will become a fully qualified laboratory technician with a QQI Level 6 Higher Certificate in Science - Laboratory Technician.

You may then work in a laboratory environment in biopharma, chemical manufacturing, medical devices and diagnostics, food and drink, and analytical testing laboratories.

With this four-year apprenticeship, you will become a fully qualified motor mechanic, with a QQI Level 6 Advanced Certificate Craft – Motor Mechanics.

You may then choose to work as a motor mechanic in the motor industry in a dealership, repair shop or test centres like the NCT.

Many apprentices use their apprenticeship qualification as a platform to launch careers such as engineers, managers, self-employed business owners, technical trainers, instructors, lecturers, teachers amongst others.

On completion of this four-year apprenticeship, you will become a fully qualified plumber, with a QQI Level 6 Advanced Certificate Craft - Plumbing.

You may then choose to work as a self-employed plumber in private dwellings, or as a contractor in industrial and commercial buildings.

Many apprentices use their apprenticeship qualification as a platform to launch careers such as engineers, managers, owners of businesses, teachers and instructors.

The Laboratory Technician apprentice will be responsible for carrying out basic laboratory duties that may include sample collection, equipment calibration, solution preparation, stock control and glassware maintenance while conducting basic physical and analytical testing methods on raw materials, in-process or finished product. All work to be conducted and recorded in accordance with good laboratory practices.

This is a three year, Level 7 Apprenticeship, with 70% of time spent in the workplace, and 30% in TUS. This course will suits individuals who are existing Production Operators/Technicians who want to train or retrain in the engineering and manufacturing sectors, and progress to a level 7 qualification.

Please note that you must already be employed in a Manufacturing Engineering Apprenticeship contract before you can apply for the Bachelor of Engineering in Manufacturing Engineering Apprenticeship.

This Apprenticeship is a 2/3 year programme, with an approved employer, with 70% of the time spent on the job and the remaining 30% spent in the TUS Midwest Moylish Campus. Students will remain in paid employment for the 24-36 month period, allowing them to “earn while you learn”.

This programme is professionally accredited by Engineers Ireland. This is an objective evaluation and approval of engineering programmes, ensuring that they meet international standards, the needs of the engineering profession and broader responsibilities to society, environment and economy. Graduates of accredited programmes, at the appropriate standard, may go on to achieve one of the professional titles of Chartered Engineer, Associate Engineer and Engineering Technician.

A mechanical automation and maintenance fitter will be involved in plant and machinery installation; maintenance and repairs; replacement of broken or working parts; adjustment; servicing and checking components; and equipment component replacement. A fitter will also fabricate parts using machine tools.

On completion of this four-year apprenticeship, you will become a fully qualified mechanical automation and maintenance fitter, with a QQI Level 6 Advanced Certificate Craft - Mechanical Automation and Maintenance Fitting.

You may then choose to work as a mechanical automation and maintenance fitter in industries such as engineering, manufacturing, pharmaceuticals, quarries, mines, food processing, local authorities, petrochemicals and the armed forces.

Many apprentices use their qualification as a platform to launch careers such as engineers, managers, owners of businesses and instructors amongst others.

With this two-year apprenticeship, you will become a fully qualified commis chef, with a QQI Level 6 Advanced Certificate in Culinary Arts.